Nortek YAP1F - 1.2 Preparation before operation; 1.3 Introduction of operation function

3DJH
User’s Manual of Remote Controller
No. Button name Function
1 ON/OFF Turn on or turn off the unit
2 TURBO Set turbo function
3 MODE Set operation mode
4 Set up&down swing status
5 I FEEL Set I FEEL function
6 TEMP Switch temperature displaying type on the unit’s display
7 Set health function and air function
8 LIGHT Set light function
9 X-FAN Set X-FAN function
10 SLEEP Set sleep function
11 CLOCK Set clock of the system
12 TOFF Set timer off function
13 TON Set timer on function
14 Set left&right swing status
15 FAN Set fan speed
16 / Set temperature and time
1.2 Preparation before operation
When using the remote controller for the first time or after replacing the batteries,
please set the time of the system according to current time in the following steps:
（
1
）
Pressing CLOCK button,
is blinking.
（
2
）
Pressing
or button, the clock time will increase or decrease rapidly.
（
3
）
Press CLOCK button again to confirm the time and return to display current
time.
1.3 Introduction of operation function
（
1
）
Selecting operation mode
In unit on status, press MODE button to select operation mode in followin
g