32 Installing and connecting a Series 2332 Access Point
NN47250-302 (324136-A Version 01.03)
Figure 4 shows the contents of the shipping carton for a model Series 2332 access point.
Figure 4. 2332 Series Shipping Carton Contents
Before you begin installation:
1 Open the carton and carefully remove the contents, if you have not already done so.
2 Place the packing materials back in the carton and save the carton.
3 Verify that you received each item in the previous list. If any item is missing or damaged, contact Nortel.
Installation requirements and recommendations
For best results, follow these requirements and recommendations before installing an AP.
WLAN Management software network plan and work orders
If you are using the WLAN Management Software to plan your Nortel Mobility System installation, you might want to
create and verify a network plan for the entire Nortel network installation and generate an AP work order, before
T-bar clamps
Mounting template
Rubber feet
Universal
mounting bracket
Mounting hardware
Access Point
840-9502-0001
To Next Page
Loading...
