NorthStar EXPLORER 457 - Page 37

Northstar FISH 457/467 Installation and Operation Manual 37
Setup option menus
Factory default settings are shown. The setup data available will depend on the optional sensors and
instruments installed.
Logs (see 8-4)
SmartCraft
(See the SmartCraft
Gateway Installation
and Operation Manual)
Units (see 8-6)
Comms (see 8-7) Calibrate (see 8-8) Simulate (8-10)
Alarms (see 8-5)
Fuel (see 8-3)Sonar (see 8-2)System (see 8-1)
Favorites (8-9)