Notifier ACPS-2406 User Manual

Addressable Charger/
Power Supply
ACPS-2406
Manual
B
PN 51304:B ECN 03-366
Document 51304
09/02/2003 Rev:

Notifier ACPS-2406 Specifications

General

Brand	Notifier
Model	ACPS-2406
Category	Power Supply
Language	English

Summary

Installation Precautions

Section 2 Installation

2.1 In a CAB-3 Series Cabinet

2.2 In a BB-25 Cabinet

2.3 In a CAB-PS1 Cabinet

2.4 Wiring

Explains power-limited and nonpower-limited wiring separation and entry.

Section 3 Configuring the ACPS-2406

3.1 DIP Switch Configuration

Explains programming using DIP switches SW2 and SW3.

3.2 Addressing

Details how DIP switch configurations determine address consumption.

Determining Address Consumption

Explains how ACPS-2406 occupies address blocks based on DIP switch settings.

Setting the Base Address

Explains how rotary switch and jumper settings select the base address.

3.3 Panel Programming Requirements

Outlines programming ACPS-2406 addresses into the FACP.

Panel Addressing

Details programming ACPS-2406 addresses into the FACP in order.

Software Type ID Codes

Selecting Dual Stage Mode

Addressing in Dual Stage Mode

Dual Stage Panel Programming

Section 4 Applications

4.1 NAC Outputs

4.2 General Purpose Power

4.3 Style B (Class B) Initiating Device Circuit

4.4 Synchronization

Section 5 Power Supply Calculations

5.1 DC Current Draw Calculations

Guides on calculating standby and alarm DC current loads for the unit.

5.2 Battery Calculations

Explains how to calculate battery size in Ampere Hours (AH).