Need help?Do you have a question about the Notifier FCPS-24S8 and is the answer not in the manual?
General| Output Voltage | 24 VDC |
|---|---|
| Output Current | 8 A |
| Battery Charger | Yes |
| Primary Input | 120 VAC |
| Operating Temperature | 0°C to 49°C (32°F to 120°F) |
| Humidity | 93% RH noncondensing |
Key features include lockable cabinet, power-limited outputs, and sync capabilities.
Step-by-step guide for initial setup, including jumper configuration and wiring.
Instructions for selecting a location and mounting the backbox securely.
Details on wiring Notification Appliance Circuits (NACs) in Style Y and Style Z configurations.
Ensuring compliance with NEC standards for separating power-limited and non-power-limited wiring.
Table detailing DIP switch configurations for various programmable features.
How the FACP supervises the FCPS-24S wiring and detects faults.
FACP supervision of wiring using End-of-Line Resistors (ELR).
Detection of power supply faults (AC fail, battery fail, etc.) by the FACP.
Guide to calculating power supply currents and battery requirements.
Steps for determining the required AC branch circuit capacity.
Methodology for calculating total system current draw in alarm and standby.
Determining the appropriate battery size (AH) for standby and alarm duration.
To Next Page
