Need help?Do you have a question about the Notifier APS-6R and is the answer not in the manual?
General| Output Voltage | 24 VDC |
|---|---|
| Output Current | 6 A |
| Battery Backup | Yes |
| Number of Circuits | 4 |
| Power Rating | 144 W |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Input Voltage | 120 VAC, 60 Hz |
| Primary Input | 120 VAC, 60 Hz |
| Battery Capacity | Up to 18 Ah |
Provides an overview of the APS-6R Auxiliary Power Supply's purpose and documentation.
Identifies key features of the APS-6R power supply, including output circuits, LED indicators, and jumper locations.
Lists detailed electrical and mechanical specifications for the APS-6R, including power ratings, fuses, and dimensions.
Details the quantity and description of items included in the APS-6R parts kit for assembly and mounting.
Outlines the section's content on mounting, wiring, configuring, and servicing the APS-6R.
Provides step-by-step instructions for mounting the APS-6R into CAB-3/CAB-4 Series cabinets using a CHS-4 Series chassis.
Covers typical field wiring from APS-6R to control panels, optional devices, and wiring multiple APS-6R power supplies.
Illustrates typical wiring connections for the APS-6R, detailing output circuits, primary and secondary power terminals.
Details how to connect multiple APS-6R power supplies using trouble bus connectors J3 and J4.
Explains powering ICM/ICE Notification Appliance Circuits (NACs) using APS-6R output circuits J1 and J2.
Shows typical wiring for supplying power-limited output from the APS-6R to a control module's SLC loop.
Details configuration options for the APS-6R, including AC loss delay settings and 240 VAC operation.
Describes how to replace the APS-6R's serviceable components, specifically fuses F1 and F2.
Provides step-by-step instructions for mounting the APS-6R into an AFP-200 backbox.
Details primary power, secondary power, and trouble input connections between the APS-6R and the AFP-200.
Outlines the procedure for mounting the APS-6R into a CAB-400AA backbox for AFP-300/AFP-400 systems.
Describes primary, secondary, and trouble input connections between the APS-6R and the MPS-400.
Explains mounting the APS-6R in a CAB-600AA backbox for AFC-600 systems.
Details wiring connections from the APS-6R to the MPS-6 for AFC-600 systems.
Details mounting the APS-6R in a CAB-500 backbox for System 500.
Shows wiring connections between the APS-6R and the MPS-24BRB for System 500.
Describes mounting the APS-6R in a CHS-4 Series chassis for System 5000, AM2020, or AFP-1010.
Details wiring connections between the APS-6R and the MPS-24A for System 5000, AM2020, or AFP-1010.
Refers to System 500 wiring instructions for connecting the APS-6R to an MPS-24BRB.
Explains mounting the APS-6R on a CHS-4 Series chassis for NFS-640 systems.
Details wiring connections between the APS-6R and the NFS-640.
Describes mounting the APS-6R on a CHS-4 Series chassis for NFS-3030 systems.
Details wiring connections between the APS-6R, AMPS-24, and CPU-3030 for NFS-3030 systems.
To Next Page
