Notifier FDU-80

To Next Page

To Previous Page

FDU-80 Annunciator

SW1 DIP Switch Settings

Document 51264 Rev A2 6/14/00 P/N 51264:A2

Note: SW1 DIP switch settings as illustrated in Figure 1-3 are as

follows:

1. DIP switch 1: On = Key-switch disabled (membrane function

switches are always enabled with key-switch having no affect on

their function).

2. DIP switch 2: Off = piezo sounder disabled (requires approval of

LAHJ)

3. DIP switch 3: Off = Receive Only. This setting is used for all

annunciators except the last or only FDU-80 Annunciator on the

EIA-485 line

4. DIP switches 4 through 6: Off = Configured for operation with

the AFC-600 or AFP 300/400 FACP

5. DIP switches 7 and 8: Off (these switches are not used)

Figure 1-3: DIP Switch Settings Example

switch 1 shown

in ON position

switches 2 through 8

shown in Off position

dipswfdu.cdr