Notifier NFS-320 - C.3.3 Read Point; C.3.4 Display Devices in Alarm or Trouble

NFS-320/E/C, NFS-320SYS/E Operations Manual — P/N 52747:E1 06/16/2011 63
Using the CRT-2 for Read Status Remote Terminal Access
C.3.3 Read Point
From the Read Status menu, select option 1 - Read Point. The CRT-2 displays the following:
Enter the following:.
1. Enter the first letter of the device, using upper case letters.
• Detector = “D”
• Module = “M”
• Zone = “Z”
• Special Function = “F”
• Releasing Zone = “R”
•E Zone = “E”
•L Zone = “L”
• System Parameter = “S”
2. Enter the address or number of the device.
3. Press “
ENTER”.
Example Read points for detectors 1D001 and 1D002 on SLC 1:
C.3.4 Display Devices in Alarm or Trouble
From the “Read Status” menu, select option 2 - Read Alarms/Troubles. The CRT-2 will display the
alarm and trouble history.

The semicolon, a control character in networking applications, separates the hour and minute of
events displayed from history. If events display as they occur, a colon separates the hour and
minute.
Press <1> <ENTER>
Type D(nnn), (n)M(nnn), Z(nn), F(n),, R(n), Ex, Lx or S(n) then hit Enter
Address )01-159)
Number
NOTE: Press F5 to scroll forward through a list of devices. Press F6 to scroll back through a list
of devices.
NORMAL SMOKE (PHOTO) INTENSIVE CARE UNIT NURSE LOUNGE Z050 020%A6 6 CV30 1D001
Press <D> <0> <0> <1> <
ENTER>
NORMAL SMOKE (PHOTO) DETECTOR ADR 1D002 Z002 000%A6 6 ** 1D002
Press <
NEXT>
TROUBL SMOKE(PHOTO) DETECTOR ADDR 1D003 INVREP 01;09P 041608 1D003
TROUBL SMOKE (ION) DETECTOR ADDR 1D004 INVREP 01;09P 041608 1D004
TROUBL HEAT(FIXED) DETECTOR ADDR 1D006 INVREP 01;09P 041608 1D006
TROUBL MONITOR MODULE ADDR 1M041 INVREP 01;09P 041608 1M041
TROUBL IN SYSTEM GROUND FAULT 01;09P 041608 Wed
TROUBL IN SYSTEM BATTERY 01;09P 041608 Wed
Press <2> <
ENTER>