21
EN
4 / PROGRAMMING YOUR APPLIANCE
• CHANGING A WASH PROGRAM
•During programming
All program changes are possible as long as
you have not yet pressed the “Start/Pause”
button.
•After the cycle starts
— It is not possible to modify the type of fabric
(for example, change from “Cotton” to
“Mixed”, from “Mixed” to “Delicates”, etc ...
EE
•After the cycle starts
— You can change the duration of the
"Delayed Start" at any time before the cycle
starts.
Nota : If, during this time, you want to cancel
the "Delayed start", adjust the display until
the cycle duration appears. Briefly press the
“Start/Pause” button . You can also can-
cel the delayed start by turning the program
selector to “0”.
— You can only activate the “Prewash” option
before the cycle starts if “Delayed start” is
selected.
— You can activate the “Rinse Plus” option at
any time before the rinse starts (until the
“Rinse” cycle light comes on).
— You can only modify the “Intensive”,
“Colours” and “Rinse Plus” options before
the cycle starts.
— You can select the “Drying” option after the
cycle has started (if the laundry load is not too
heavy to allow follow-on drying).
AA
EE
33
•At the end of the cycle
When the machine displays "- 0 -" you can pro-
gram a new cycle without returning the pro-
gram selector to the “0” position
.
The machine is then ready to be reprogram-
med.
AA
To change fabric type midway through the
cycle, you must cancel the program that is
underway, then program a new cycle.
— The same will apply if you turn the program
selector when the child lock option is activa-
ted.
— You may, however, (without modifying the
fabric type) change the temperature at the
start of the wash phase without cancelling the
cycle.
Nota : The cycle duration will be modified
accordingly.
— You can change the spin speeds at any time
during the cycle.
— You can select “Drain” or “Full tank stop” at
any time before the end of the rinse (until the
“Rinse” light goes out).
11
NB : If you turn the program
selector to a different
type of fabric, three horizon-
tal lines will appear on the
display to inform you
that this change is not allo-
wed and that it will not be
taken into account.
33
AA
To Next Page
Loading...