16
EN
4 / PROGRAMMING YOUR APPLIANCE
• DESCRIPTION OF THE CONTROL PANEL
— Choose the wash cycle best suited to the type of laundry
by turning the program selector .
NB : Turning the selector to a position other than
“0”
swit-
ches the machine on.
AA
— You can change the spin speed proposed using the Spin
button.
— Or for the end of cycle : choose drain.
The cycle will end with draining at 110 rpm without spin.
— Or : full tank stop.
Your machine will stop with a tank full of water before the
final spin.
BB
The machine displays the most sui-
table spin speed for the program
chosen as well as the duration of
this program for a standard load.
•Operations to perform
Display
• PROGRAMMING A WASH CYCLE
NB : All buttons are touch-sensitive; they do not press down. A simple touch is sufficient.
Program selector
Spin speed setting
Options and
Child Safety Selection buttons
Delayed start / Drying time
Start/Pause
EE
DD
CC
BB
AA
Cycle sequence indicator lights
Spin speed display
Time display
Child Safety lock indicator light
44
33
22
11
U/min
U/min
U/min
— If necessary choose options using the buttons. (see
chapter “DETAILS OF OPTIONS”).
Information : You can select only the options
compatible with the program chosen.
CC
Light on: option selected
Light off: option not selected
NB : Choosing an
option changes the
cycle duration.
www. .ch
To Next Page
Loading...