18
EN
Important : At the end of the drying cycle, remember to clean the drying filter
(refer to the
chapter on "EVERYDAY MAINTENANCE OF YOUR APPLIANCE").
4 / PROGRAMMING YOUR APPLIANCE
• PROGRAMMING A WASH CYCLE WITH SUBSEQUENT DRYING
• PROGRAMMING A DRYING CYCLE ONLY
— Turn the program selector to choose your “High” or
“Low” drying program according to the type of laundry.
— Select a drying time using the Drying button
.
DD
AA
— Program your wash cycle (see previous pages).
— Select the “Drying” option using the Drying button .
DD
•Operations to be perform
Display
Display
The "Drying" indicator lights up.
•Operations to be perform
(The indicator for the
"Drying" option lights up)
The time displayed includes esti-
mated drying time.
— Press the “Start/Pause” button . The cycle starts.
Important :
To ensure proper drying, the load must not exceed 4
kg.
If the machine estimates that the load is too large to permit
subsequent drying, it stops at the end of the wash cycle
and informs you via the figure "4" flashing on the display
In this case, adjust the laundry load, adjust the drying
22
FF
— Press the “Start/Pause” button . The cycle starts.
NB: First ensure :
- that the water valve is open.
- that the load has been sufficiently spun (at least 1000 rpm)
and that it does not exceed half a drum.
EE
Your appliance lets you run a drying cycle straight after a washing cycle with automatic detection
of the end of drying.
NB: Results obtained may vary somewhat depending on the type of laundry load.
If your laundry load is too large to permit subsequent drying, or if you wish to dry only part of the
load, you may select drying to machine dry only the desired items, adjusting the duration to the
type and quantity of laundry.
time using the “Delayed start / Drying” button and
DD
press “Start/Pause” button to resume drying.
EE
To Next Page
Loading...