23
EN
4 / PROGRAMMING YOUR APPLIANCE
• DETAILS OF OPTIONS
•Prewash
Specially designed for soiled laundry (mud,
blood, etc.).
Cold agitation precedes a heating phase
30°C. This cold agitation helps remove the
stain particles before heating.
Important :
In this case, it is necessary to also
place detergent in the “ ” compartment of
the detergent dispenser.
•Intensive
This function improves washing performance
and by automatically increasing the tempera-
ture of the wash water and the agitation time,
it treats stubborn stains.
•Rinse plus
"Sensitive and allergic skin cycle": adds an
extra rinse to the wash cycle
•Colours
This program lets your washing machine take
care of your dark-coloured laundry and pre-
vent wrinkles and white marks.
•Drying
This program lets you run a drying cycle
immediately after your wash cycle. This option
always uses HIGH drying temperature. The
program will stop automatically when the
appliance estimates the laundry to be dry.
Therefore you do not need to program the
drying duration
• OTHER FUNCTIONS
•Draining
This function is for very delicate laundry and lets you eliminate spinning and go directly to the emp-
tying phase.
•Full tank stop
This function is used for textiles that you do not wish to spin or if you envisage being absent for a
long time after the washing is finished.
When this function is selected, the cycle interrupts before the final spin, enabling your washing to
soak in the water to avoid creasing.
Then:
— to drain and spin :
Select the “Spin” program using the program
selector , then, using the Spin button,
set a spin speed suited to the type of laundry.
The program will finish automatically.
BBAA
— to drain only :
Select the “Spin” program, then using the
Spin button , change the display to
(drain function).
BB
NB : When the machine is stopped with the tub full of water, the display
stops counting down the remaining time and the “Rinse” cycle light flashes.
33
To Next Page
Loading...