25
Pot Modes and Fader Modes (49, 61, 88 key)
Above the top row of pads are the Pot modes. Hold Shift and press the pad for the mode you want to use.
You can reassign the faders on Launchkey 49, 61 and 88 holding Shift and pressing the fader buttons.
When you move a pot or fader the screen momentarily displays the parameter and its current value. You
can assign these modes to either pots or faders at any given time, but both cannot have the same mode.
Device mode
Device mode links the pots or faders to control Cubase’s ‘Track Quick Controls’. To assign the faders to
Cubase’s Track Quick Controls, hold Shift and press the Device button below fader one.
Volume mode
Volume mode links the Launchkey’s pots or faders to control the volumes for the track bank you select.
Pans Mode
Pans Mode links the Launchkey’s pots to the pans for the bank of tracks you select. You cannot assign
Faders to Cubase’s Pan controls.
Sends (Sends A and B)
Pressing the Sends pad once sets the pots to control the first bank of sends (Sends A) for the bank of
tracks you select. Pressing the Sends pad when you’re already in Sends mode toggles the pots between
Sends A and Sends B in Cubase.
Hold Shift and press the Sends A or Sends B button beneath faders three or four to assign either Sends
bank to the faders.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
![Preview: Novation Launchpad Mini [MK3]](https://data.easymanua.ls/products/284351/200x200/novation-launchpad-mini-mk3.webp)
