53
Faders and Fader Buttons (Launchkey 49, 61 and 88 only)
The faders always control track volumes for the selected bank of tracks.
The Arm/Select button toggles between arming tracks (default) and selecting tracks. When in select mode
the Fader buttons are lit dim white and in arm mode red. When a track is selected and active, the Fader
button will be lit brightly.
Transport Buttons
The transport buttons listed below will function as described when used with HUI.
• Play - Pressing this button will initiate playback of the track.
• Stop - Pressing this button will stop playback of the track.
• Undo - pressing this will trigger the undo function.
• Rec - pressing this will trigger the record arm function.
• Loop - toggles the transport loop (“cycle mode”).