47
Pots
Device Mode - Links the pots to the parameters, or “smart controls” of the device on the selected track.
For instrument tracks, this is the parameter array of the instrument. To assign the pots to Device Mode
press the Device Pad (upper left) with the Shift button held. Now, when you move a pot, the changed
device parameter and its current value is displayed on the screen for a moment.
The image below shows a track containing a ‘Classic Electric Piano’. In this example your Launchkey’s
eight pots control a variety of important parameters including Bell Volume, Treble, Drive etc.
Volume Mode - Links the pots to the volume control of a project’s tracks, including send tracks (busses).
When you move a pot, the changed device parameter and its current value is displayed on the screen for
a moment.
Pan Mode - Links pots to control the pans for the relevant tracks, including send (busses). When you move
a pot, the changed device parameter and its current value is displayed on the screen for a moment.
Sends Mode - Links the pots to control the sends. When you move a pot, the changed device parameter
and its current value is displayed on the screen for a moment.
Note (49, 61 and 88 key models only): a mode cannot be assigned to both the pots and the faders at the
same time. If a mode is already mapped to the pots, then the respective Fader Button will appear red
while Shift is held, pressing a Fader Button whilst in this state will not assign the faders to that mode.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
![Preview: Novation Launchpad Mini [MK3]](https://data.easymanua.ls/products/284351/200x200/novation-launchpad-mini-mk3.webp)
