OPERATION
SHEET/PILE DRIVING AND EXTRACTING
SWIVEL FEATURE
A free-turning swivel top (m7) is provided on models C6CSD, C8CSD and C10CSD
NPK Sheet Pile Drivers. The self-aligning swivel feature minimizes carrier repositioning.
The cylinder clamp assembly (sp3) can align to the job from any carrier position, over a
wide range of boom positions. The excavator can be positioned over, parallel or
perpendicular to the trench if necessary.
The swivel can be locked in place either parallel or perpendicular to the boom.
88 – Line of Sheeting
To Next Page
Loading...