OPERATION
Keep personnel and bystanders clear of the SHEET PILE DRIVER (SD) while in
operation. NO ONE should be under the unit!
CHUCKING THE SHEET PILE
1. Turn the sheet pile driver frame manually until it is
positioned in parallel to the sheet pile. Then chuck the
sheet pile.
2. Attempting to chuck a sheet pile quickly at full throttle,
will cause a jerky, unsmooth movement of the Sheet
Pile Driver. It is much safer and more efficient to chuck
a sheet pile slowly at low throttle until the sheet pile is
securely clamped.
LIFT THE SHEET PILE
1. Do not lift the sheet pile too fast, as it may cause bending.
To Next Page
Loading...