EasyManua.ls Logo

NSK FX15 - Page 10

NSK FX15
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
EN DE FR ES IT PT
Should the handpiece function abnormally during use,
stop using the handpiece immediately and contact your
Authorized NSK Dealer.
Do not use the following fluids to wipe, immerse or clean
the product; strong/super acid water, strong acid/alkaline
chemicals, chlorine-containing solutions, solvents such
as benzine or thinner.
The handpiece is delivered in a non-sterile condition and
must be autoclaved prior to use.
Perform regular function and maintenance checks. (Refer
to "10. Periodical Maintenance Checks")
If the handpiece has not been used for a long period,
rotate the handpiece and check for noise, vibration and
overheating before use.
To avoid clinical downtime it is recommended that a
spare be kept on hand in case of a breakdown during
treatment.
The operation of the handpiece is permitted only on
dental units which correspond to the standards
IEC 60601-1 (EN 60601-1) and IEC 60601-1-2
(EN 60601-1-2).
U.S. Federal law restricts this device to sale by or on the
order of a licensed physician.

Related product manuals