NSK FX15 - Post-Use Maintenance

11
EN DE FR ES IT PT
WARNING
•Immediatelyafteratreatment,thehandpiece
shouldbecleaned,lubricatedandsterilized.
Failuretoproperlymaintainthehandpiecemay
leadtooverheating,causingburninjuriesor
productfailure.
CAUTION
• Do not use the following fluids to wipe, immerse or clean
the product; strong/super acid water, strong acid/alkaline
chemicals, chlorine-containing solutions, solvents such
as benzine or thinner.
8. Post-use Maintenance
After each patient maintain the product as follows.
8-1 Preparation
1) Wear a eye protection, a mask and gloves to avoid
infection.
2) Remove the bur/file.
3) Disconnect the handpiece from the motor.