NTEGRA Spectra Probe NanoLaboratory. SNOM Measuring Head. Instruction Manual
3. Mount the positioning device with the optical tube on the base unit as follows:
a. Loosen nuts of the guide pins 1 (Fig. 2-7).
Fig. 2-7. Positioning device
1 – nuts for fastening the guide pins; 2 – guide pins;
3 – slots of the M4×8 fastening screws
b. Carefully place the positioning device so that the guide pins match the seats of the
replaceable panel (Fig. 2-8).
Fig. 2-8. Replaceable panel mounted on the base unit
c. Secure the positioning system with three M4×8 screws (pos. 3 in Fig. 2-7), with
Allen key.
Seats of the positioning device
20
To Next Page
Loading...