Nu-Tek Levator Elite LE9011 User Manual

- Page 13 -
Nu-Tek Levator Elite User Manual
Clinical Mode - Program - Phase
The Nu-Tek Levator Elite enables the patient or therapist to select a
pre-set program or a custom program to make the appropriate
treatment. Clinical Mode: Using the circular button select either EMG,
STIM or ETS and press the OK button to enter the mode. In EMG mode,
there are two functions: assessment and training. For assessment, only
one pre-set program is used, the user can view the treatment progress.
The device has two custom EMG/ETS programs. You can set up one
EMG/ ETS phase with your chosen parameters.
In STIM mode, Levator Elite has 20 pre-set Pelvic floor muscle
stimulation programs covering Genuine Stress, Urge, Frequency,
weekly maintenance, Lack of sensation, Rectal stimulation and several
other patient conditions. There are 3 custom programs that can be
programmed to meet individual user conditions and have a diverse
range of parameters to meet any current stimulation requirements. The
programs can be divided into a maximum of 5 sequential phases.
Phase Time is the time remaining for the Current Phase. The overall
time is a combined time of all the program phases. Overall time always
indicates the remaining time of the program session.
A
e
T

Nu-Tek Levator Elite LE9011 Specifications

General

Brand	Nu-Tek
Model	Levator Elite LE9011
Category	Medical Equipment
Language	English