Machine Set-Up
Control of Substances Hazardous to Health (COSHH)
For further guidance on hazardous substances refer to health and safety instructions online.
Water Flow Adjustment
(Fig 14).
Ideally set the tap to 45
0
this enables the cleaning
(Fig 15).
Pre-cleaning advice.
Important
Do not operate machine unless the Operator Manual has been read and fully understood.
!
!
Before performing the cleaning operation, place out
(Fig 16).
WHEN HANDLING AND MIXING CHEMICALS.
! !
Fig 14
Fig 15
Fig 16
Numatic part (629044) Wet Floor sign
(available if required)
45
0