20
Contents:
1 x Operator Manual
1 x Battery charging lead
2 x Keys
2 x 50 amp fuses + (1 x spare)
1 x Maxi fuse-puller
Lift top tank assembly to reveal battery compartment,
ensuring you use the handle grip provided (Fig.1).
Fit battery fuses (contained in start-up pack) into the
battery fuse holders as illustrated (Fig.2).
Note: Wear suitable gloves when inserting fuses.
Insert the key, turn the main control on / off key to position ‘1’ (ON) (Fig.3).
Using the control handle with both hands, slowly push the machine off the pallet (Fig.4).
When the machine is removed and in a safe position, turn the key back to position ‘0’ (OFF).
Use handle grip when
raising or lowering the
top waste-tank.
Quick Set-Up Guide
PLEASE READ BEFORE COMMENCING ANY OPERATION.
AFTER THE REMOVAL OF ALL THE PACKAGING,
CAREFULLY OPEN AND CHECK THE CONTENTS OF THE START UP PACK.
!!
Note: Ensure that no metal objects come into contact with battery terminals while the batteries are exposed.
When inserting the rst fuse you may notice a spark, this is normal.
To Next Page
Loading...
