26
The machine is now ready to be moved to the cleaning site.
Before performing the cleaning operation, place out appropriate
warning signs and sweep or dust-mop the oor.
IMPORTANT
Do not operate machine unless the Operator Manual has been read and fully understood.
!!
WHEN HANDLING AND MIXING CHEMICALS
Always ensure that chemical manufacturer’s safety guidelines are followed.
Only use chemicals recommended for use in auto scrubber-dryers.
!
!
Note: always ensure that the waste-water tank is empty before lifting.
The water level in the clean-water tank can be measured using the
scale on the left rear side of the machine (Fig.15).
The clean water bottom tank holds 60 litres.
Fill-level Indicator
Machine Set-Up
To Next Page
Loading...
