15
1
1
2
2
2 While holding the Latch Release
Lever, pull out and fully extend the
Latch Connectors
(14)-1 and rotate
them 180 degrees (14)-2 until they
are pointing toward the Latchs in the
vehicle.
To ease attachment of the Latch
Connectors, if desired, attach the
provided Nuna Latch Guides by
hooking them onto the vehicle
Latchs. (15)
3 Line up the Latch Connectors
with the vehicle’s Latchs and press
both connectors rmly until a click is
heard and both are securely fastened.
(16)
Make sure that both Latch Connectors
are securely attached to the vehicle’s
Latchs.
4 The Latch Connectors will both show
green when secured properly.
(16)-1
5 Check to make sure the booster seat
is securely installed by pulling out on
both the Latch Connectors.
17
1
2
Approximately 3 – 12 years
36kg
(150cm)
15kg
(96cm)
6 To detach the Latch Connectors from
the vehicle, move seat bottom out to
position 8, then squeeze the release
buttons on the Latch Connectors
(17)-1 while pulling out. (17)-2
Use as a High Back Belt
Positioning Booster
Your child must meet ALL of the
following requirements below:
Age: Approximately 3 – 12 years
Weight: 15 – 36kg
Height: 96 – 150cm
To Next Page
Loading...
