Nuna PIPA rx User Manual

40 PIPA rx instructions PIPA rx instructions 41
RELX
™
Base Stability Leg
(continued)
1
- If stability leg lifts base more
than 1 inch off the seat, adjust
as needed to close the gap.
DO NOT use stability leg to
recline the base. The recline
adjustment feature is meant to
recline the base.
2 - Always store stability leg when
not in use. Press adjustment
button to shorten stability leg,
then push leg into storage area.
Push until the release button
clicks into place.
The stability leg can be used or
stored for both rigid latch and
vehicle belt installation.
2
1

Nuna PIPA rx Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Canopy	UPF 50+ canopy with flip out eyeshade
Harness	5-point harness
Base Compatibility	PIPA series base
Safety Features	Side impact protection
Safety Standards	FMVSS 213
Compatibility	Nuna strollers with adapters
Installation	Belt path or with base using True lock™ base installation
Weight of Car Seat	7.6 lbs (without base)