Nuna PIPA rx User Manual

43PIPA rx instructions42 PIPA rx instructions
Installation
If child is not secured properly,
child could be ejected in a
sudden stop or crash, resulting
in serious injury or death.
RELX
™
Base Installation Using
Rigid Latch (Lower Anchors)
1
- Rotate rigid latch (lower
anchors) down and point them
away from base.
2 - Position base in a forward
facing vehicle seat with the
stability leg deployed (if using)
(p.38).
It is recommended that you use the
stability leg, which reduces crash
forces in the event of an accident.
3 - If preferred, install rigid latch
guides on vehicle lower
anchor bars.
4 - Grasp rigid latch anchors and push
down and forward to connect to
vehicle lower anchor bars.
Be sure that the base bottom is
firmly seated on vehicle seating
surface and there is no gap
between the base bottom and
vehicle seat.
(continued on the next page)
2
1
3
4

Nuna PIPA rx Specifications

General

Product Type	Infant Car Seat
Weight Capacity	4 to 32 lbs
Height Capacity	Up to 32 inches
Canopy	UPF 50+ canopy with flip out eyeshade
Harness	5-point harness
Base Compatibility	PIPA series base
Safety Features	Side impact protection
Safety Standards	FMVSS 213
Compatibility	Nuna strollers with adapters
Installation	Belt path or with base using True lock™ base installation
Weight of Car Seat	7.6 lbs (without base)