If using lap belt only
1 - Attach the tether hook loosely to the vehicle tether anchor. Pull the vehicle seat belt
across the anti-rebound panel and under the True Tension
™
door. If possible, secure
the vehicle lap belt under the belt positioner.
2 - With the lap belt routed under the True Tension
™
door and secured under the second
belt positioner, buckle the vehicle seat belt.
3 - Check the vehicle seat belt, make sure it is not twisted and is laying flat across the
rebound panel.
4 -
While pushing down firmly on the car seat, pull on the vehicle belt to remove the slack.
5 - Close the True Tension
™
door.
3
46 REVV
™
instructions
47REVV
™
instructions
5
2
4
1
To Next Page
Loading...
