he display will read PROGRAM. ON-OFF.
ress ENTER and the display will read
o n d a y , together with the ON-OFF times
se the ▼ key to pass on to following days).
ress ENTER and the set switching on time
ill begin to blink. Use the ▼ ▲ keys to
hange the time setting. Press ENTER to
onfirm and to pass on to the switching off
me, which will begin to blink. Use the ▼▲
eys to change the time setting and press
NTER to confirm and to pass on to the fol-
wing day (use the ▼▲ keys to pass on to
o disable the on-off functions for the
eekly day off, press the RESET key. The
isplay will read DAY OFF (to reset, press
fter the display has read Sunday, if the ▼
ey is pressed again, a beep sound will indi-
ate the passage on to the following page.
he display will read D E L I V E RY C O U N T.
ress ENTER and the display will read
O TA L S E L E C T. The leds of the select keys
ill begin to blink and when a select key is
ressed, the display will show the number of
elative deliveries made. This number can be
et to zero using the RESET key (the CONTI-
UOUS COFFEE function counts as one
elivery). Use the ENTER key to display the
perator delivery counts (if fitted). Press ▼ t o
ass from TO TA L SELECT to the G R O U P
O TA L sub-page. The leds for the SHORT
SPRESSO keys of all groups will begin to
link and if, for example, the SHORT
SPRESSO key of group 1 is pressed (the
d remains lit), the display will read G R O U P
TO TA L, together with the total number of
eliveries (this can be set to zero using the
R E S E T key). Use the ENTER key to display
the operator delivery counts. Press ▼ f r o m
the G R O U P TO TA L page to display the
MACHINE TO TA L (the total number of deli-
veries made), which can be set to zero using
the RESET k e y. Press ENTER to display the
operator totals. To return to the D E L I V E RY
COUNT page, press ▲ then press ▼ to pass
on to the next page.
Cup Warmer Programming
Insert key U.
The display will read C U P WA R M E R
P R O G . By pressing ENTER, the left hand
side of the display will flash ON followed by
the programmed value (0-60 min.), while
the right hand side of the display will read
OFF followed by the programmed value (0-
60 min.).
e.g.: ON 05-OFF 60
The ▼▲ keys can be used to vary cup war-
mer activation times. ENTER confirms this
setting and passes on to the cup warmer
stop time setting, which is carried out using
the ▼▲ keys once the display has begun to
flash. To pass on to the next page, press
ENTER.
PLEASE NOTE: The cup warmer is started
automatically as soon as the temperature
drops to below 95°C, or rises to above
125°C. In the latter case, the display will
flash PRESSURE ERROR and the relay
switch will disconnect the resistance until
the temperature returns to normal levels.
By setting one of the values to zero, this
function is excluded.
When the cup warmer has been program -
med, the relative led flashes slowly.
Clock Setting
Insert key U.
The display will read D ATE - HOUR. I f
ENTER is pressed, the time already pro-
grammed will be displayed,
e.g.: MONDAY 08:22 31 MAY 1997
The ▼ ▲ keys can be used to change the
time setting which will begin to flash.
Confirm with the ENTER key to pass on to
the minutes setting and then again to the
d a y, month and year settings. At the end,
use the ENTER key to pass on to the fol-
lowing page.
Grinding Control programming
Insert key U.
Please Note: the Program Vip Plus model is
equipped with an electronic system that is
capable of detecting delivery parameter
variations that depend upon the grinding
fineness of the coffee. For this reason,
values should be programmed (min. and
max. delivery times for a sample quantity of
10 c.c. for a single espresso and 30 c.c. for
a double espresso).
The display will read GRINDING, and when
ENTER is pressed, it will read 1 ESPRES-
SO followed by the set values (min. 0-max.
40). The bottom line of the display will read
2 ESPRESSO followed by the set values,
(min. 0-max. 40).
e.g.: 1 ESPRESSO 02-06
2 ESPRESSO 03-07
The first value, which will begin to blink, can
be changed by using the ▼▲ keys and then
confirming with ENTER to pass on to the
following value. After the final value has
been set, press ENTER to pass on to the
next page.
If the system detects a delivery time that is
lower than the minimum time set, the
display will show the message C O A R S E
GRINDING (see the Diagnostics Section).
At this point, the grinder must be regulated
and the grinding fineness reduced. If the
system detects a delivery time above the
maximum time set (for the sample quantity),
To Next Page
Loading...
