Nureva SPAN - Table of Contents

4
February 2017
BEFORE YOU BEGIN
Table of contents
7
8
11
15
16
18
19
20
24
27
28
1. Determine the installation location
2. Install the hardware brackets
3. Install the hardware
4. Connect the hardware
5. Initial adjustment of the projected image(s)
6. Install the surfaces
7. Download Span wall software and touch driver
8. Set up touch
9. Final adjustment of the projected image(s)
10. Launch Span software
11. Troubleshooting
INSTALLATION — DO THE INSTALLATION IN THIS ORDER
What’s in the box
You must supply
5
6