Nussbaum 2.35 TSK - Master Document of the Automotive Lift; Lift -Manufacturer; Application; Changes at the Construction

To Next Page

To Previous Page

Operating Instruction and Documentation

2.35 TSK

- 8 -

2.Master document of the automotive lift

2.1 Lift –manufacturer

Otto Nußbaum GmbH & Co. KG

Korker Straße 24

D-77694 Kehl-Bodersweier

2.2 Application

The automotive lift 2.35 TSK is a lifting mechanism for lifting motor vehicles with a laden weight

of up to 3500 kg. The max. load distribution is 2:1 in or against drive-on direction. The

automotive lift is only designed for servicing vehicles. It is not allowed to carry persons with the

lift.

It’s not allowed to install the standard-automotive lift in a hazardous location or washing bays.

2.3 Changes at the construction

Changes at the construction, expert checking, resumption of work (date, kind of change,

signature of the expert)

..............................................................................................................................................................

............................................................................................................…………………………………...

name, address of the expert

........................................................... ............................................................

place, date signature of the expert

2.4 Displacement of the automotive-lift

Displacement of the automotive-lift, expert checking, resumption of work (date, kind of

change, signature of the competent)

..............................................................................................................................................................

name, address of the competent

........................................................... ............................................................

place, date signature of the competent