nutricook SMART POT 2

Questions and Answers

A
Ashley MillerSep 9, 2025
Why is steam escaping from the pressure release valve on my nutricook SMART POT 2?
- C
  corey03Sep 9, 2025
  If steam is escaping from the pressure release valve of your Nutricook Electric Pressure Cooker while the pressure release button is in the Sealing position, it could be due to: * The pressure release valve not being properly installed. Ensure it is correctly installed. * A malfunctioning pressure sensor control. In this case, contact Customer Service for assistance.
T
Timothy GarciaSep 12, 2025
Why is it difficult to close the lid of my nutricook Electric Pressure Cooker?
- L
  Lawrence MarquezSep 12, 2025
  If you're finding it hard to close the lid of your Nutricook Electric Pressure Cooker, here are a couple of things to check: * **Sealing ring:** Make sure the sealing ring is correctly placed in the sealing ring rack. * **Float valve:** If the float valve is in the popped-up position, gently press it downward using a long utensil.
D
David LandrySep 12, 2025
What to do if inner pot sticks with the lid when opening my nutricook SMART POT 2 Electric Pressure Cooker?
- D
  Deanna HernandezSep 13, 2025
  If the inner pot sticks to the lid when opening your Nutricook Electric Pressure Cooker, it's likely due to suction created during cooling. To resolve this, press down the pressure release button to the Venting position to completely release any remaining pressure.
D
Deanna HicksSep 14, 2025
Why doesn't the float valve rise on my nutricook SMART POT 2?
- K
  kingkristaSep 14, 2025
  If the float valve on your Nutricook Electric Pressure Cooker isn't rising, it could be due to: * Food debris on the float valve. Clean the float valve thoroughly. * Insufficient liquid in the inner pot. Add thin, water-based liquid to the inner pot based on the size: 6L - 375 ml | 8L - 500 ml.
R
Ryan GarciaSep 16, 2025
Why is minor steam leaking from the pressure release valve of my nutricook SMART POT 2?
- A
  akirbySep 16, 2025
  Minor steam leaking from the pressure release valve of your Nutricook Electric Pressure Cooker can occur because: * The pressure release button is not in the Sealing position. Make sure the pressure release button is properly in the Sealing position. * The cooker is regulating excess pressure, which is completely normal, and no action is required.
B
bwardSep 18, 2025
Why does my nutricook SMART POT 2 produce clicking or light cracking sounds?
- J
  Joseph GreenSep 18, 2025
  The clicking or light cracking sounds from your Nutricook Electric Pressure Cooker are completely normal. They are produced by the power switching and expanding pressure while the temperature changes, so no action is required.

Summary

User Guide

Before You Begin

Important Safeguards and Cautionary Information

General Safety

Fundamental safety guidelines and precautions for general use.

Electrical Safety

Precautions to prevent electrical hazards like shock and damage.

Electrical Information

Details concerning the power cord and extension cord usage.

Whats Included

Product Specifications

Technical details and dimensions for different Smart Pot 2 models.

Cooker Parts Overview

Getting Started

Opening and Closing the Lid

Sealing Ring Installation and Removal

Pressure Release Valve: Install and Remove

Using the Pressure Release Button

Float Valve: Install and Remove

Anti-Block Shield: Install and Remove

Condensation Collector Installation

Removing and Cleaning the Inner Pot

Venting Methods

Quick Release (QR)

Method for quickly releasing pressure using the release button.

Natural Release (NR)

Method for naturally releasing pressure over time.

Safe Lid Opening

Procedure for safely opening the lid after pressure release.

Control Panel Details

Time and Status Display

Understanding the time and status indicators on the display.

Cooking Status Indicators

Interpreting the lights that show cooking progress.

Cooking Mode Indicators

Understanding indicators for various cooking modes and settings.

Sauté, Pressure Cook, and Slow Cook Indicators

Specific indicators for key cooking programs.

Indicator Light

General indicator light for active programs.

Time Controls

How to adjust cooking time using the control buttons.

Smart Cooking Programs

List of available intelligent cooking programs.

Cancel Button Function

Using the cancel button to stop operations.

Keep Warm Button

How to use the keep warm feature.

Start Button

Initiating the cooking cycle with the start button.

Delay Timer Button

Setting a delayed start for cooking programs.

Status Icons

Understanding various status icons displayed on the panel.

Smart Features

Auto-Save Cooking Mode and Time

How the appliance remembers your customized cooking settings.

Delay Timer

Auto Keep Warm Function

Explanation of the automatic keep warm feature after cooking.

Adjustable Keep Warm Function

How to manually set and adjust the keep warm time and temperature.

Lid Safety Lock System

Description of the safety mechanism preventing lid opening under pressure.

Display Messages

Smart Cooking Programs Table

Initial Test Run

Sauté Program

Deglaze Inner Pot

Technique for deglazing the inner pot after sautéing for flavor.

Pressure Cooking Programs

Slow Cook Program

Yogurt Program

Pasteurizing Milk

Procedure for pasteurizing milk, a key step in yogurt making.

Adding Culture and Fermenting Yogurt

Process of adding culture and fermenting the milk for yogurt.

Sous Vide Program

Care and Maintenance

Accessory Cleaning

Instructions for cleaning the various accessories included with the cooker.

Lid and Parts Cleaning

How to clean the lid and its removable parts.

Troubleshooting

Error Codes and Beeping

Interpreting error codes and continuous beeping for diagnosing problems.

Warranty Information

Limited Warranty Terms

Specific terms and conditions of the Nutricook limited warranty.

Obtaining Warranty Service

Procedure for contacting customer service for warranty claims.

Warranty Exclusions and Limitations

What is not covered by the Nutricook limited warranty.