Using Warm independently
Keeps your food warm until you are ready to serve.
1. Press and hold Warm for 1 second.
2. The Brio will automatically begin to warm your food at the default temperature of
140F.
• Press Warm again to cancel the Warm function at any time.
3. You can adjust the cooking temperature and time using the Up and Down arrows.
4. When the Brio has nished warming, it will beep 3 times and the LED display will
show "End".
Note: The maximum Warm temperature is 200F. The maximum time is 3 hours.
Using Warm with Menu
Select your preset and have the Brio warm your food.
1. Press Menu.
2. Select your desired preset (1-100).
3. Press Warm.
4. Adjust the Warm temperature and time by pressing Stage and using the Up and
Down arrows.
5. Press START/PAUSE to begin cooking.
• You can adjust the Warm temperature and time at any time.
• Press WARM at any time to cancel.
Stage
The Stage function gives you the ability to cook your food at different temperatures
throughout the cooking process. You can dene up to ve 5 different cooking stages.
The default for Stage 1 is 350°F for 15 minutes, and 350°F for 0 minutes for all
subsequent stages.
Example: You can set your food at 400F for 10 minutes, have it switch to 350F for
20 minutes, and then have the Brio cook at a lower
temperature for the remainder of the cooking process.
1. Press Stage. This is Stage 1.
2. Adjust the cooking temperature and time.
3. Press Stage again to add Stage 2.
4. Adjust the cooking temperature and time.
Repeat until you have programmed all the
stages you need (up to 5 stages).
5. Press START/PAUSE to begin cooking with your set cooking stages.
ADVANCED SETTINGS
18 | nuwavenow.com
To Next Page
Loading...
