ENGLISH
Hand-wash
Clean your Brio after every use or in between a number of large batches. Do not use metal
utensils or harsh abrasives when cleaning as this can damage the coating.
1. Unplug the Brio and make sure it cools completely.
2. Use a damp cloth to wipe the outside of the appliance.
3. Clean the Mesh Tray, Mesh Racks, Drip Tray, Grill/Griddle Plate, Rotisserie Basket,
Rotisserie Skewer, and Door with a nonabrasive sponge, hot water, and mild
detergent. Dry thoroughly.
4. To clean the Probe, wipe it with a damp cloth or paper towel. Allow the Probe to dry.
Tip: If there is residual food or particles on the Tray, Racks, Grill/Griddle Plate, Rotisserie
Skewer, or Basket, add some hot water and let the item soak separately for about 10
minutes for easier cleaning. Then, use a soft cleaning brush to remove any lingering food.
Dry the parts thoroughly.
Dishwasher
Bottom rack: Mesh Tray, Mesh Racks, Drip Tray, Grill/Griddle Plate.
Top rack: Rotisserie Basket, Rotisserie Skewer.
Note: Water can get inside the Door if it is washed in the dishwasher. It is recommended
you hand-wash the Door.
IMPORTANT - Do not immerse the Brio and door in water or attempt to cycle them
through the dishwasher. The outer surface may be cleaned by carefully wiping it
with a damp dishcloth or sponge. Make sure the Brio has cooled completely prior to
cleaning.
WARNING
In case of problems, immediately unplug the Brio and contact Customer Service.
For Amazon Purchases: support@nuwavenow.com
For All Other Purchases: help@nuwavenow.com
Storage
1. Unplug the Brio and let it cool down completely.
2. Make sure that all the parts are clean and dry.
3. Store in a cool dry place.
CLEANING & MAINTENANCE
nuwavenow.com | 25
To Next Page
Loading...
