NuWave Brio 38020 - Rotisserie Basket Assembly

Notes:
• For better results, use kitchen twine
around the chicken or other meats.
• Always check that there is sufcient
space above and below your
food so it can rotate freely without
obstruction.
• When using the Rotisserie Skewer,
place the Drip Tray on the bottom.
Left
Right
CAUTION
Rotisserie Skewer parts will be hot during
and after use. Use oven gloves when
handling.
Rotisserie Basket Assembly
To use the Rotisserie Basket with the
Brio, follow the steps and illustrations
below:
1. Remove the top lid from the
Rotisserie Basket: Squeeze the
prongs on the outside of the top
lid toward the middle and lift up.
Remove the other end from the
holes.
2. Place your food in the Basket.
3. Adjust the top lid to t over your
food: Place the ends of the top lid
into the slots. Squeeze the prongs
on the outside of the top lid and
slide them down into position, lined
up with, and opposite, the slots on
the other side.
• The position of prongs should
be lined up and opposite the slot
holes on the other side.
• Make sure the top lid lies at
over the food and that it ts
snugly.
4. After securing your food in the
Basket, take the Basket and slide
it into the Brio between Position
2 and Position 3. The rectangular
end without grooves should be
on
4
3
2
1
4
3
2
1
ASSEMBLY GUIDE
8 | nuwavenow.com