nux Cerberus - Using the Effects; DRIVE;DIST (Overdrive;Distortion) Controls; MOD (Chorus;MOD FX) Controls

UsingtheEffectsUsing the Effects
DRIVE/DIST(Overdrive/Distortion)
Cerberus allows you to choose among four different signal
roungs. A roung defines how the signal runs through
the unit. To Switch among roungs, press ROUTING
switches.
NOTE:
The selected roung is stored as part of each preset.
DRIVE
DIST
DRIVE:
Sets the gain of the drive.
GAIN:
Sets the gain of the dist.
TONE:
Sets color of the sound.
LEVEL:
Sets volume of the drive.
TONE:
Sets color of the sound.
LEVEL:
Sets volume of the drive.
DIST OD DIST OD DIST OD DIST OD
Serial Roung 1 Serial Roung 2 Parallel Roung Toggle Roung
Serial Roung 1:
The signal is going through the overdrive secon first and
then to the distoron secon. If you want to use the
overdrive secon to push the distoron secon, this
roung is for you.
Drive Dist
Serial Roung 2:
The signal is going through the distoron secon first and
then to the overdrive secon.
DriveDist
Parallel Roung:
The signal is processed in parallel by the two secons, and
they provide their owner characteriscs.
Drive
Dist
Toggle Roung:
Use the Drive and Dist foot switches as toggles for overdrive
and distoron.
Drive
Dist
MOD(Chorus/MOD FX)
Chorus
MOD FX
RATE:
Sets rate of the chorus.
RATE:
Sets rate of the mod fx.
DEPTH:
Sets depth of the chorus.
LEVEL:
Sets level of the effect.
DEPTH:
Sets depth of the mod fx.
98