Nvidia DGX-2 SYSTEM

Network Configuration
DGX-2 System User Guide
33
● To set the default gateway IP (“Router IP address” in the BIOS settings), enter the
following and replace the italicized text with your information.
$ sudo ipmitool lan set 1 defgw ipaddr 10.31.241.1
5.6.2 Configuring a BMC Static IP Address Using the
System BIOS
This section describes how to set a static IP address for the BMC when you cannot access
the DGX-2 System remotely. This process involves setting the BMC IP address during
system boot.
1. Connect a keyboard and display (1440 x 900 maximum resolution) to the DGX-2
System, then turn on the DGX-2 System.
2. When you see the SBIOS version screen, press Del or F2 to enter the BIOS Setup
Utility screen.
3. At the BIOS Setup Utility screen, navigate to the Server Mgmt tab on the top menu,
then scroll to BMC network configuration and press Enter.