Nvidia DGX-2 SYSTEM User Manual

Restoring the DGX-2 Software Image
DGX-2 System User Guide
50
7.3.2 Creating a Bootable USB Flash Drive by Using
Akeo Rufus
On a Windows system, you can use the Akeo Reliable USB Formatting Utility (Rufus) to
create a bootable USB flash drive that contains the DGX-2 software image.
Ensure that the following prerequisites are met:
 The correct DGX-2 software image is saved to your local disk. For more information,
see Obtaining the DGX-2 Software ISO Image and Checksum File
.
 The USB flash drive has a capacity of at least 4 GB.
1. Plug the USB flash drive into one of the USB ports of your Windows system.
2. Download and launch the Akeo Reliable USB Formatting Utility (Rufus).
3. Under Boot selection, click SELECT and then locate and select the ISO image.
4. Under Partition scheme, select GPT.
5. Under File system, select FAT32.
6. Click Start. Because the image is a hybrid ISO file, you are prompted to select
whether to write the image in ISO Image (file copy) mode or DD Image (disk image)

Nvidia DGX-2 SYSTEM Specifications

General

Brand	Nvidia
Model	DGX-2 SYSTEM
Category	Computer Hardware
Language	English