Nvidia Mellanox ConnectX-4 Lx User Manual

13

Safety warnings are provided here in the English language. For safety warnings in other
languages, refer to the
Adapter Installation Safety Instructions document available on
Mellanox's website.
Hardware Installation
Installation and initialization of ConnectX-4 Lx adapter cards require attention to the mechanical
attributes, power specification, and precautions for electronic equipment.
Safety Warnings
Please observe all safety warnings to avoid injury and prevent damage to system components. Note
that not all warnings are relevant to all models,
Unable to render include or excerpt-include. Could not retrieve page.
Installation Procedure Overview
The installation procedure of ConnectX-4 Lx adapter cards involves the following steps:
Step Procedure Direct Link
1
Check the system’s hardware and software
requirements.
Refer to System Requirements
2
Pay attention to the airflow consideration within the
host system.
Refer to Airflow Requirements
3
Unpack the product.
Refer to Unpacking the Product
4
(Optional) Replace the full-height mounting bracket
with the supplied short bracket.
Refer to Bracket Replacement
Instructions
5
Install the ConnectX-4 Lx adapter card in the
system.
Refer to Installation Instructions
6 Connect cables or modules to the card. Refer to Cables and Modules
7
Identify the ConnectX-4 Lx adapter card in the
system.
Refer to Identifying the Card in Your
System

Nvidia Mellanox ConnectX-4 Lx Specifications

General

Brand	Nvidia
Model	Mellanox ConnectX-4 Lx
Category	Adapter
Language	English