# mount
-o ro,loop
MLNX_OFED_LINUX-<ver>-<OS label>-<CPU
arch>.iso
/mnt
2.
Set “ONBOOT=no” in the "/etc/infiniband/openib.conf" file.
3.
If the modules exist in the initramfs file, they can automatically be loaded by the kernel.
To prevent this behavior, update the initramfs using the operating systems’ standard tools.
Note: The process of updating the initramfs will add the blacklists from step 1, and will prevent
the kernel from loading the modules automatically.
mlnxofedinstall Return Codes
The table below lists the mlnxofedinstall script return codes and their meanings.
Return Code Meaning
0
The installation ended successfully
1
The installation failed
2
No firmware was found for the adapter device
22 Invalid parameter
28 Not enough free space
171
Not applicable to this system configuration. This can occur when the
required hardware is not present on the system.
172
Prerequisites are not met. For example, missing the required software
installed or the hardware is not configured correctly.
173
Failed to start the mst driver
Uninstalling MLNX_OFED
Use the script /usr/sbin/ofed_uninstall.sh to uninstall the Mellanox OFED package. The script is part of
the ofed-scripts RPM.
Installing MLNX_OFED Using YUM
This type of installation is applicable to RedHat/OL, Fedora, XenServer Operating Systems.
Setting up MLNX_OFED YUM Repository
1.
Log into the installation machine as root.
2.
Mount the ISO image on your machine and copy its content to a shared location in your network.
3.
Download and install Mellanox Technologies GPG-KEY:
The key can be downloaded via the following link: http://www.mellanox.com/downloads/ofed/
RPM-GPG-KEY-Mellanox
blacklist mlx4_core
blacklist mlx4_en
blacklist mlx5_core
blacklist mlx5_ib
To Next Page
Loading...
Need help?
General
