Nvidia Mellanox ConnectX-4 Lx User Manual

40

If no reboot options are specified, the installer restarts the computer whenever necessary
without displaying any prompt or warning to
the user.
To control the reboots, use the /norestart or /forcerestart standard command-line options.
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /S /v/qn
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /vMT_NDPROPERTY=1
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /vMT_SKIPFWUPGRD=1
1
Unattended Installation
The following is an example of an unattended installation session.
1. Open a CMD console-> Click Start-> Task Manager File-> Run new task-> and enter CMD.
2. Install the driver. Run:
3. [Optional] Manually configure your setup to contain the logs option:
4. [Optional] if you wish to control whether to install ND provider or not (i.e., MT_NDPROPERTY
default value is True).
5. [Optional] If you do not wish to upgrade your firmware version (i.e.,MT_SKIPFWUPGRD default
value is False).
_All_Arch.exe /S /v/qn /v”/l*vx [Log- File] "" v:shapes="_x0000_s1026">

Nvidia Mellanox ConnectX-4 Lx Specifications

General

Brand	Nvidia
Model	Mellanox ConnectX-4 Lx
Category	Adapter
Language	English