•
•
•
•
•
•
mstarchive tool The mstarchive tool allows the user to create a file with the mfa2
extension. The new file contains several binary files of a given firmware for
different adapter cards.
For further information, refer to section mstarchive.
All
mstprivhost The ability to restrict the hosts from configuring the NIC. Meaning, only the
Arm side will have the privilege to configure the NIC.
Note: This utility is supported in BlueField devices only.
All
mstconfig in
BlueField
Enables the user to manage (grant/restrict) mstconfig configuration
privileges for BlueField Arm systems.
All
Bug Fixes See .MFT Bug Fixes History v4.18.1 All
Rev. 4.10.0
ESXi Added support for ESXi 6.7. ESXi
FreeBSD Added support for verbose output when running "mst status" in FreeBSD. FreeBSD
mstfwreset Enabled mstfwreset loading/unloading of the driver per a specific device in
Linux OSes.
Note: On Multi Host devices with firmware version lower than 1x.23.xxxx,
the flag "--pci_link_downtime 2.5" must be added to mstfwreset
Linux
Secure Firmware mstflint now handles all the burn parameters when MCC is enabled and
displays the secure-FW CS tokens.
All
Supported Devices [Beta] Added support for BlueField SmartNIC. All
mstconfig Added the option to query partial parameters All
mstconfig Added the following new parameters:
FLEX_PARSER_PROFILE_ENABLE
ECPF_ESWITCH_MANAGER
ECPF_PAGE_SUPPLIER
SAFE_MODE_ENABLE
SAFE_MODE_THERSHOLD
BOOT_UNDI_NETWORK_WAIT
All
Bug Fixes See .MFT Bug Fixes History v4.18.1 Linux
Rev. 4.9.1
mstfwreset Added support for mstfwreset in Power9 platforms. Linux
Rev. 4.9.0
mstfwreset Added support for a hot swap (or hot plug) of the PCIe slot. Linux
To Next Page
Loading...
Need help?
General