Nvidia MSTFLINT Documentation

102
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Secure Firmware
Update
Added support for Secure Firmware Update to ConnectX-4 adapter cards. All
Enabled signing the package with an RSA 4096 bit keys. All
Added support for setting the GUIDs when Secure Firmware Update is
enabled.
All
mstconfig Added the following mstconfig configuration parameters:
AUTO_RELOAD
DRIVER_SETTINGS
EXP_ROM_PXE_ENABLE
EXP_ROM_UEFI_ARM_ENABLE
EXP_ROM_UEFI_X86_ENABLE
INTERNAL_CPU_MODEL
IPV4
IPV6
PCI_DATA_WR_ORDERING_MODE
PXE_UNDI
STATUS_UPDATE
TCP
TCPIP
TRACER_ENABLE
All
mstlink Added support for force speed configuration. All
Added support for the PEPC (show_external_phy) register. All
mstdump Added support for nvlog dump. All
Rev. 4.8.0
mstconfig Added support for hardware timestamp in ConnectX-3/ConnectX-3 Pro
devices.
All
Added the following mstconfig configuration parameters:
MULTI_PORT_VHCA_EN
BOOT_LACP_DIS
IP_OVER_VXLAN_PORT
IP_OVER_VXLAN_EN
UEFI_HII_EN
IB_ROUTING_MODE_P1
IB_ROUTING_MODE_P2
SRIOV_IB_ROUTING_MODE_P1
SRIOV_IB_ROUTING_MODE_P2
All
Secure Firmware
Update
Added support for Secure Firmware Update in ConnectX-5/ConnectX-5 Ex. All
Added support for setting forbidden versions. All
FPGA management
for JTAG
Programming
Added the option to enable/disable FPGA management by the firmware for
JTAG programming.
Linux
Rev. 4.7.0

Nvidia MSTFLINT Specifications

General

Brand	Nvidia
Model	MSTFLINT
Category	Tools
Language	English