To Next Page

To Previous Page

•

Internal Ref.

No.

Issue

Keywords: mstlink, LID, InBand, OpenSM

Discovered in Version: 4.20.0

2823492 Description:mstfwreset is not supported on DPU with GPU boards.

Workaround:N/A

Keywords:mstfwreset

Discovered in Version: 4.18.0

2715716 Description:mstfwreset is not supported on secure-boot host devices.

Workaround:N/A

Keywords:mstfwreset

Discovered in Version: 4.18.0

2752916 Description:The information of the IB/ETH protocols should not be stored on the same

CSV file. Doing so will result ina mismatch on thecolumns of CSV file.

Workaround:N/A

Keywords:mstlink

Discovered in Version: 4.18.0

2838222 Description:mlxfwreset is not supported on kernel3.10.0-1062.el7.x86_64 due to a

kernel bug that leads to 'rescan' PCI operation to take a few minutes.

Workaround:N/A

Keywords:mstfwreset

Discovered in Version: 4.18.0

2670833 Description:Burning firmware using DMA might fail on virtual FreeBSD machines.

Workaround:N/A

Keywords:Firmware burning, DMA, FreeBS, VM

Discovered in Version: 4.17.0

2484780 Description:Configuring TX/RX_rate to 200GbE in test mode fails.

Workaround:To work with the new speedsspecify the number of lanes as shown below:

100G_1X/200G_2X/400G_4X/800G_8X for NDR speeds

50G_1X/100G_2X/200G_4X/400G_4X for HDR speeds

Keywords:200GbE, Tx/Rx

Nvidia MSTFLINT Documentation

Other manuals for Nvidia MSTFLINT