Nvidia Quadro FX 4800 - Page 12

NVIDIA Corporation
8 Quadro FX 4800/5800 and Quadro CX SDI User’s Guide– Version 1.0
C
HAPTER 2
NVIDIA Graphics-to-SDI
Step 2: Connect the Auxiliary Cabling and Monitor
1 ConnecttheDVIConnectors.
ConnectoneendoftheDVIcabletotheDVIconnectorontheSDIOutputcard,andthe 
otherendtothe“north”DVIconnectorontheNVIDIAQuadroFXSDIcardasshown
inFigure2.1andFigure2.2.
Thecablemustbeconnectedtothe
“north”DVIconnector.TheNVIDIAQuadroFX
SDIwillnotworkproperlyifthecableisconnectedtotheotherdigitalconnectors.
Figure 2.1 DVI Connection between the SDI Output card and the Quadro CX/QuadroFX 4800
.
Figure 2.2 DVI Connection between the SDI Output card and the Quadro FX 5800
Quadro CX and Quadro FX 4800
SDI-Output Card DVI Connector
“north” DVI Connector
Quadro FX 5800 “north” connector
SDI-Output Card DVI Connector