Nvidia Quadro FX 4800 - Page 21

NVIDIA Corporation
Quadro FX 4800/5800 and Quadro CX SDI User’s Guide – Version 1.0 17
C
HAPTER 3
Windows–Using the Graphics to SDI Control Panel
2 IfyouareusingmorethanoneNVIDIAQuadroFXSDIcard,underSelectadisplayto
configureSDIoutputclickthedisplayiconcorrespondingtothedisplayyouwantto
configure,thenfollowtheremaininginstructionsforthatdisplay.
• Thisoptiondoesnotappearifyoursystemcontainsonly
oneNVIDIAQuadroFX
SDIcard.
• IfthisoptiondoesnotappearandyoursystemdoescontainmorethanoneNVIDIA
QuadroFXSDIcard,see“EnablingMultipleSDICards”onpage 27forinstructions
onenablingthecards.
3 UnderSendSDIoutputusing,selecttheSDIoutputmodethat
youwanttouse.
• Clonemode:InClonemode,theSDIoutputisacloneofthedisplayoutput.
• Dualviewmode:InDualviewmode,youcandefineonelargedesktopthatextends
fromthedisplaytotheSDIoutput.ThisletsyoumovewindowsbetweentheSDI
outputand
thegraphics(DVI)displaypartoftheextendeddesktop.
• DonotsendSDIoutput:Withthisoption,nosignalissenttotheSDIoutput.The
remainingcontrolsonthepagearedisabled.Choosethisoptionifyouwantan
applicationtocontroltheSDIoutput.Oncetheapplicationis
running,thispagedoes
notletyouchangethesettings,butonlyshowsthesettingsestablishedbythe
application.