Nvidia Quadro FX 4800

To Next Page

To Previous Page

NVIDIA Corporation

18 Quadro FX 4800/5800 and Quadro CX SDI User’s Guide– Version 1.0

HAPTER 3

Windows–Using the Graphics to SDI Control Panel

4 ClicktheSDISettingsbartoopentheSDISignalSettingsdialogbox.

5 ChooseamethodfordeterminingtheformatoftheSDIoutput‐eitherusing internal

timingorsynchronizedtoanexternalsignalsource.

•Touseinternaltiming,selectFreerunning(internaltiming),thenclickthelistarrow

and

choosefromthelistofavailableSDIsignalformats.

•Tosynchronizetoanexternalsignalsource,makesurethehousesyncisconnectedto

theINPUTBNCconnectoronthegraphicscard,thenselecttheSynchronizedtoa

housesyncsignalradiobuttionandsetupthesynchronizationandsignalformats

as

follows:

• SelecttheHousesynctyperadiobutton(SDIorComposite)thatcorrespondstothe

syncsignaltypeyouareusing.

• TosynchronizethepixelscanningoftheSDIoutputtotheexternalsignalusing

genlock,selectPixel‐accuratesynchronization.

Nvidia Quadro FX 4800 - Page 22