Nvidia Quadro FX 4800 - Page 23

NVIDIA Corporation
Quadro FX 4800/5800 and Quadro CX SDI User’s Guide – Version 1.0 19
C
HAPTER 3
Windows–Using the Graphics to SDI Control Panel
• TosynchronizetheframerateoftheSDIoutputtotheexternalsignalusing frame
lock,selectFrame‐accuratesynchronizationusingthisformat,thenclickthelist
arrowandchoosefromthelistofavailableSDIsignalformats. 
• TointroduceadelayintheSDIoutput,enterthepixel
orlinedelayvaluesinthe
appropriateHSYNCorVSYNCdelayboxes.
See“SynchronizingtheSDIOutputtoanExternalSource”onpage 20foradditional
information.
6 ChecktheTerminatetheanalogsignalatthisconnectorcheckboxif
• thesystemisastandalonesystemsynchronizedtoahousesyncsignal,
or
• thesystemisthelastinachainofsystemsconnectedtothesamehousesyncsignal.
7 ChoosetheSDIoutputdataforma tbyclickingtheSDIoutputformatlistarrowand
thenselectingfromthelistofavailablecolorformats.
8 ClickOKwhendonetoclosethedialog
box.
9 ClickApply.