Nvidia Quadro FX 4800 - Page 43

NVIDIA Corporation
Quadro FX 4800/5800 and Quadro CX SDI User’s Guide – Version 1.0 39
C
HAPTER 4
Linux—Using the Graphics to Video Out Control Panel
Step 2: Choose a Synchronization Method
1 ClicktheGraphicstoVideoOut:SynchronizationOptionstreeitemfromtheside
menu.
TheSyncOptionspageappears.
2 FromtheSyncOptionsgroupbox,clicktheSyncModelistarrowandthenclickthe
methodyouwanttousetosynchronizetheSDIoutput:
• FreeRunning:TheSDIoutput
willbesynchronizedwiththetimingchosenfromthe
SDIsignalformatlist.
• Genlock:TheSDIoutputwillbesynchronizedwiththeexternalsyncsignal.
• FrameLock:TheSDIoutputwillbesynchronizedwiththetimingchosenfromthe
SDIsignalformatlist.
Thislistislimitedtotimingsthat
canbesynchronizedwiththedetectedexternalsync
signal.
Formoreinformationregardinggenlockandframelock,seethesection “Synchronizing
theSDIOutputtoanExternalSource”onpage 44.