*The figure is for illustration purposes only. The LEDs location and shape may
slightly vary in different systems.
Two Power Inlets - Electric Caution Notifications:
Important
After inserting a power cable and confirming the green System Status
LED light is on, make sure that the Fan Status LED is green.If the Fan
Status LED is not green, unplug the power connection and check that
the fan module is inserted properly and that the mating connector of
the fan unit is free of any dirt and/or obstacles. If no obstacles were
found and the problem persists, call your NVIDIA representative for
assistance.
Important
Risk of electric shock and energy hazard. The two power supply
units are independent. Disconnect all power supplies to ensure
a powered down state inside of the switch platform.
ACHTUNG Gafahr des elektrischen Schocks. Entferrnen des
Netzsteckers elnes Netzteils spannungsfrei. Um alle Einhieten
spannungsfrei zu machen sind die Netzstecker aller Netzteile zu
entfernen.
ATTENTION Risque de choc et de danger e’lectriques. Le
de’branchment d’une seule alimentation stabilise’e ne de’branch
uniquement qu’un module “Alimentation Stabilise’e”. Pour isoler
completement le module en cause, Il faut de’brancher toutes les
alimentations stabilise’es.
To Next Page
Loading...
